NRF24L01 - Breakout Board Pair

Rs. 180 Rs. 180 ( % Off )
VM336
Quantity
Check availability at: * For Indian Pincodes only

NRF24L01 - Breakout Board Pair

Features & Specifications:

Features:
  • Arduino and Raspberry Pi compatible
  • Several tutorials available online, such as tutorials, data sheets, and notes
  • Auto-acknowledge and auto-retransmit
  • Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation
  • Pins are protected in anti-static foam and modules are in resealable packaging with Addicore nRF24L01+ information card

Specifications:

  • The Addicore nRF24L01+ is a 2.4GHz ISM band transceiver.
  • Includes on board support components and a 2.4GHz antenna for easy implementation into designs without additional hardware.
  • Communication range up to 262 feet (80 meters) in ideal conditions.
  • A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).
  • The on chip voltage regulator accepts supply voltages from 1.9 to 3.6V. When using the nRF24L01+ with an Arduino be sure to use the 3.3V output pin from the Arduino board to power the nRF24L01+ module.
  • The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.
  • Ultra low power consumption as low as 11.3mA transmitting, 13.5mA receiving at 2Mbps, 900nA in power down, and 26uA in standby.
  • Internal filtering results in high margins of meeting RF regulatory standards. The module's radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).
  • The module includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller, (ex: Arduino), from sleep when the module receives a transmission providing great power conservation in battery devices.
  • Auto-acknowledge and auto-retransmit
  • Module Dimensions: 29mm (1.142") long x 15.2mm (0.595") wide x 4.6mm (0.181") tall (not including header pins)


View Module Schematic

View NRF2401L datasheet

© vishaworld.com 2019